With profiles specially made from galvanized sheet metal, the frame life of your tent will be 50% longer. Güney Grupsan Tent uses profiles that are galvanized inside and out in equal measure, produced in special sizes according to the tent structure model as standard. The main load-bearing profiles that make up the frame are produced in special dimensions, making them single-piece with no welded joints. This feature increases the resistance of the tent structure against both lateral and vertical loads.

The characteristic of flame-retardant tarpaulin is that it extinguishes a short time after the heat source is removed and the smoke completely disappears shortly after. This feature ensures that your tent structure is immediately resistant to fire, providing you with an advantage against fire hazards. Güney Grupsan Tent uses flame-retardant (flame-retardant) tarpaulin as a standard in its products.

As insulation options:

1. Industrial type, densified, produced with spring technology, highly sound-absorbing, made of 100% polyester, quick-drying, suitable for living environments, able to cover the tent surroundings in one piece, long-lasting Izofelt,
2. Bizofol ABA insulation material with both surfaces covered with foil and single or double-layer air bubble inside can be applied.
   
   

Each insulation option can be applied individually according to the usage purpose, or two or more can be applied simultaneously.

Especially in tent structures used for livestock purposes, the evacuation of dirty air inside is very important. In addition to feeding, the need for clean air must also be met for animal health and development. Therefore, ventilation becomes very important depending on the size of the tent structure, the type and number of animals to be housed inside, and the climatic conditions of the area where the tent structure will be used. Our company offers you ridge type or sheet metal chimney ventilation options.

1. Ridge type ventilation is installed at the top of the tent structure in dimensions of 1×2 meters, preventing rain from entering.
2. Our new type of sheet metal chimneys, which are longer inside, help retain heat while allowing the evacuation of dirty air.
3. Ventilation windows are installed above the doors to ensure continuous clean and dry air inside the tent structure. These ventilation windows provide a continuous flow of clean air inside while ridge or chimney type ventilation easily evacuates dirty air. A tent structure with clean and dry air inside will have minimal condensation.
4. Another important aspect is the ventilation gaps created between the final tarpaulin layer and the insulation layer. These gaps prevent moisture between the final tarpaulin layer and the insulation material.

We have door options based on the size and purpose of the tent structure. Our profile doors are made from profiles that are galvanized inside and out in equal measure. Large doors can include personnel doors. Large doors can also be made with a sliding system upon request. Depending on the purpose of the tent structure, door options are also available for the long sides, allowing entry and exit from the sides of the tent structure.

Door Sizes:

• 1×2
• 2×2
• 2.5×2.5
• 3×3
• 3.5×3.5
• 4×4
• 5×5

Considering the current construction costs and construction time, the advantages of tent structures come to the forefront. Tent structures can be set up very quickly and can be dismantled and reassembled at another location if needed. With insulation, ventilation, and window options, they provide a brighter and more spacious environment compared to reinforced concrete structures. Such flexibility is not possible with reinforced concrete structures. Therefore, in recent years, there has been an increased interest in tent structures, especially for livestock, storage, and production facility purposes.

To achieve the desired efficiency from tent structures and to use them for an extended period, users should pay attention to the following points:

1. Securing the Skirts: Immediately after the tent structure is set up, its skirts should be buried properly as per the instructions provided by the technical team. Periodically, the soil on the skirts should be checked and replenished in areas where it has decreased due to rain, wind, etc.

2. Snow Load Management: During heavy snowfall, support columns should be added to the main supports of economic model structures. Tent structures with truss systems are designed to prevent snow accumulation. However, in tents that are empty, snow may accumulate depending on the intensity of the precipitation. Therefore, during snowfall, the tent structure should be frequently checked, and any accumulated snow should be promptly cleared. Snow that accumulates on the tent will slide to the sides, so the long sides of the tent structure should be kept clear and cleaned frequently.

3. Wind Protection: During extremely windy conditions, doors should be kept closed and locked.

4. Ventilation: To prevent condensation and moisture, the interior should be frequently ventilated. In truss models, the windows above the doors should be kept open, and in economic models, the windows beside the doors should be kept open.

5. General Ventilation: When there are no animals inside and the weather is calm, open the doors to ventilate the tent structure.

6. Protecting Internal Layers: In tent structures used for livestock purposes, necessary precautions should be taken to prevent animals from damaging the inner layers of the tent structure (fences, cage wire, bims blocks, wood, etc.).

7. Maintaining Airflow for Livestock: Do not close all the windows in tent structures housing animals. Remember that clean air and daylight are crucial for the health and development of the animals. This also helps keep the ground inside the tent dry.

1. Galvanized Pipes and Profiles: Ensure that the pipes and profiles used are galvanized both inside and out in equal measure. (This feature is important for extending the lifespan of the tent structure’s frame by 50%.)

2. Weight of Pipes and Profiles: The weight of the pipes and profiles used in the tent structure is a crucial cost factor. When evaluating price quotes, be sure to compare the iron weights along with the square meter area and weights of the top layer tarpaulin.

3. Specifications of the Top Layer Tarpaulin: Verify the total square meter area and weights of the top layer tarpaulin, along with approval, test, and laboratory result certificates.

4. Interior Volume of the Tent Structure: The interior volume of the tent structure is particularly important for livestock health, especially in portable shelters.

5. Manufacturing Conditions and Environment: Visit and assess the conditions and environment in which the tent structure is manufactured before making a decision.

6. Review Projects and References: Be sure to review the projects and references provided by our company.

Güney Grupsan Tent structures have proven themselves in terms of quality, workmanship, and usability, setting the standard in the industry. So, why should you choose Güney Grupsan Tent Structures?

1. 1. Uncompromising Quality: We never compromise on material and workmanship quality. To maximize the benefits from tent structures, we specially produce or procure the materials used in our products.

   2. Standard Galvanized Profiles: We use profiles that are galvanized both inside and out as a standard in all our tent structures.

   3. Flame-Retardant Tarpaulin: We use flame-retardant tarpaulin as a standard, even if you do not request it. We also offer higher weight tarpaulin options with a lacquered surface upon request. Our flame-retardant and life-friendly tarpaulins come with certification, and the fire rating of the tarpaulin used is crucial. We use tarpaulins that have passed the B2 fire rating tests as standard, and can also provide tarpaulins that have passed the B1 fire rating tests if required.

   4. Alternative Insulation Options: We offer insulation options tailored to your usage needs.

   5. Detailed Quotes: Our detailed quote form for the product you requested includes the weight of the profiles and the amount of tarpaulin to be used. This information will give you an idea of the cost of the tent structure.

   6. Competitive Costs: The cost of a tent structure with the same features is the same everywhere. In fact, as Güney Grupsan Tent, we work with high stock levels for all our products, making our costs more economical. Always ask about the profile and tarpaulin specifications from companies offering lower quotes.

   7. High Stock Levels: We work with high stock levels, so all our standard models are always in stock and ready for immediate shipment.

   8. Top-Quality Standards: Profile, tarpaulin, and insulation standards for all models are set at the highest quality, and we never go below this level. Especially with profiles and tarpaulins, we never offer lower quality products.

   9. Custom Projects: For your special projects, our R&D and Project Department prepares architectural drawings and 3D visuals for production upon your approval. You can see our previous projects to help you decide more easily.

   10. Ongoing Support: You can get answers to all your questions not only when purchasing a tent structure but also while using it, with a single phone call. Our experienced sales staff are always ready to assist you.

   11. Installation Support: For models you will set up yourself, we offer support through video calls. We provide setup videos and diagrams, especially for economical and family living tents, along with video call support.

As one of the leading tent manufacturers in the Middle East and Europe, Güney Grupsan Tent certifies its quality by using first-class certified products. We are pleased to offer quality and reliable solutions tailored to your needs.

Disaster tents must be quickly set up and user-friendly. Thermal insulation is essential to protect victims from extreme cold and hot weather conditions. This insulation ensures that disaster victims are protected in a safer and more comfortable shelter. Therefore, insulation is of great importance in disaster tents.